YouTube and YouTube Music loudness: what a music video needs
YouTube normalizes music to about −14 LUFS and turns loud uploads down, but it does not turn quiet uploads up. What that means for music videos and lyric videos, and what to check before you upload.
Topic: Loudness for streaming and short video
A music video on YouTube has two parts that the viewer hears as one: the audio and the picture. The audio is loud or quiet depending on how it was mastered and how the platform handles the file. YouTube and YouTube Music both apply loudness normalization to music, and the behaviour is different from a platform that plays every file at its own level. This article explains what is commonly reported about that behaviour, what it means for music videos and lyric videos, and what to check before you upload. The platform details can change, so treat them as current reporting, not a guarantee.
How YouTube handles music loudness
The commonly reported reference for YouTube and YouTube Music is about −14 LUFS integrated. The platform turns down uploads that are louder than that reference. It does not, as far as public reporting goes, turn up uploads that are quieter. That asymmetry is the most important point for an artist.
In practice, a very loud master is reduced on playback, so the extra level does not reach the listener. A quiet master stays quiet, and it sits lower than other songs in a playlist. The safe target is therefore a master close to the reference, not a master as loud as possible, and not one that is much quieter.
YouTube also re-encodes every upload into its own formats, so the true peak can change after upload. Keep a margin below full scale, and check the file before it leaves your hands.
What it means for a music video
A music video is a video file with an audio track. The audio you upload is the file that YouTube normalizes, and the picture does not change the level. Three things matter in practice.
- Use the final master, not a bounce from the editing software. Video editors often export audio at a level that was set for the timeline, not for the final release. Use the same mastered file you would give a streaming service.
- Match the audio to the release. If the song is on Spotify or Apple Music at about −14 LUFS, the video audio should match. A video that is much louder or quieter than the release will sound different in a playlist of your own music.
- Check for clipping in the video export. Some editors re-encode audio during export and can add overshoot. If the video sounds harsh after export, compare it with the master and lower the level before export.
A visualizer, a static image or a cut-down clip with the track all carry the same audio, and the platform treats that audio the same way in each case. A visualizer that reacts to the sound does not change the level that YouTube applies, so the rule is the same. Spending time on a louder audio file for the video alone rarely pays off, because the final playback level is set by the platform's adjustment, not by the picture.
What it means for a lyric video
A lyric video is usually a simple image with the song as its audio. The same rules apply, and a few extra points help:
- Do not try to compensate with the picture. Adding a bright image does not change how loud the audio sounds. Only the audio file controls loudness.
- Keep the same master for all versions. If you make a lyric video, a short cut and a full video, use the same audio file, so the level is the same across all of them.
- Check the intro. Lyric videos often start with a quiet intro over a still image. If the intro is very quiet, listeners may think the upload is broken. Measure the first 30 seconds separately, as well as the whole track.
Checks before you upload to YouTube
- Measure the audio file. Read integrated loudness and true peak on the exact file you will upload, using the free LUFS checker.
- Aim near −14 LUFS. A master near the reference keeps the dynamics and avoids a large turn-down on playback.
- Keep true peak at or below −1 dBTP. Re-encoding can add overshoot, and the margin leaves room for it.
- Compare the video after export. Play the exported video, not only the audio file, and listen on a phone speaker and on headphones.
- Keep the release master as the source. Export the video audio from the same master you use for streaming, not from an older mix.
Common mistakes with YouTube music audio
- Mastering the audio very loud for the video. A loud master is turned down on YouTube, so the extra level is lost. Matching the release is safer than chasing volume. The free streaming penalty calculator shows how much a given master is turned down on each platform.
- Leaving a quiet upload and expecting it to be raised. Quiet uploads are not turned up in the way many artists expect. A quiet file plays quietly next to other songs.
- Using a video editor's export as the master. The export level is often set for the timeline. Use the final master instead.
- Ignoring true peak after the video is rendered. The render can add overshoot, so check the exported video, not only the source file.
Where to start
Measure the audio file with the free LUFS checker. If it is near −14 LUFS with a true peak at or below −1 dBTP, upload it. If the track is far from the reference, a free AI mastering pass can bring it to a streaming level, and you can measure the result before you put it in a video.
For a wider view of how the major services handle loudness, read the streaming loudness guide. For the short-video side, read loudness for TikTok, Reels and Shorts.
FAQ
Does YouTube make quiet music louder?
As far as public reporting goes, YouTube turns loud uploads down toward about −14 LUFS and does not turn quiet uploads up. A quiet master will therefore sound quiet next to other songs. Master near the reference instead of relying on a correction.
What LUFS should a music video audio track be?
Match the release. A master near −14 LUFS integrated, with a true peak at or below −1 dBTP, is a safe target for YouTube and for streaming services. Use the same audio file in the video as on the release.
Why does my music video sound harsh on YouTube?
Re-encoding can add overshoot between samples, so a true peak close to 0 dBTP can distort after upload. Lower the master so the true peak is at or below −1 dBTP, export the video again, and listen to the uploaded version.
Measure your music video audio before you upload
The LUFS checker is free and needs no account. Measure the audio file first, then decide whether it needs a master.
Master a track free