SoundCloud mastering loudness: how to master for a platform that does not normalize
SoundCloud does not turn playback down the way Spotify does, so the level depends on the upload. How loud to master for SoundCloud, why the transcode matters, and how to keep a streaming master from being damaged.
Topic: Loudness for streaming and short video
SoundCloud is where many artists first put a track in front of listeners, and it is one of the least predictable platforms for loudness. Spotify turns playback to a reference level, so a quiet master and a loud master end up closer together on the service. SoundCloud is generally understood not to work that way. As far as the public descriptions of the service go, the level you hear depends mostly on the file you uploaded, so the loudness choice is yours to make, and so is the risk. This article explains how to choose a level for SoundCloud without damaging the same master for streaming.
The platform details here are widely reported and can change. We do not have a measurement from SoundCloud itself, and the figures in this article come from general behaviour, not from a published SoundCloud target. Check the current behaviour before you rely on any single number.
What the platform does and does not do
Loudness normalization means the service adjusts playback so that tracks sound at a similar level. Spotify, YouTube Music and several other services do this. In those cases, the reference level is a target that the service applies after upload, and a loud master is turned down while a quiet one is left mostly as it is.
On SoundCloud, the common understanding is that the playback level follows the file. A master that is loud will sound loud, and a master that is quiet will sound quiet, at least on the public player. That makes the master itself the whole story. The upload decides how the track sits next to other tracks in a feed, and listeners compare it with what they heard just before.
Two things follow from that. First, you cannot count on the platform to correct a level that is too high or too low. Second, the file you upload is also the file that gets transcoded, and the transcode is where the risk lies.
What the transcode can do
SoundCloud stores and streams a compressed version of the upload, and the lossy encoding adds its own overshoot. A master with a true peak close to 0 dBTP can read clean in your DAW and then exceed the ceiling after encoding. The result is a small crackle or a harsh edge on the loudest peaks, which is more noticeable on loud masters than on quiet ones.
The fix is a true peak margin. Keep the true peak at or below −1 dBTP before upload. That margin is not a SoundCloud rule as such. It is the same margin that works for any lossy platform, and it leaves room for the encoder to do its work without creating new peaks.
How loud to master for SoundCloud
There is no published SoundCloud target, so the choice comes down to what you want the track to sound like and where else it will be heard. Three practical points help:
- If the track will also go to Spotify or Apple Music, master for those. A master near −14 LUFS with a true peak at or below −1 dBTP works on SoundCloud and on the streaming services. One file means one level to check, and no second version to manage.
- If the track is meant to sound loud in a feed, do not push it past the true peak limit. A louder file will stand out next to others, but the limit is the same. Overshoot after transcoding is more likely on a very loud master, so the margin matters more, not less.
- Keep the dynamics. Heavy limiting makes a track sound the same from start to finish. On a platform where the level follows the file, a track with contrast between verse and chorus usually holds the listener better.
For a release that will be heard on several services, one master near −14 LUFS is the safe choice. We do not recommend a separate SoundCloud master unless you have a specific reason, such as a demo file or a mix made to be played loud in a set.
Checks before you upload to SoundCloud
- Measure the file you will upload. Read integrated loudness and true peak on the exact WAV or lossless file, not on the MP3 you made for listening.
- Keep true peak at or below −1 dBTP. Read it again after you export the final file, because a last-minute gain change can move it.
- Listen after upload. Play the transcoded version on SoundCloud and compare it with the master. A harsh edge on the loud parts means the margin was too small.
- Check the bass. Solo the kick and sub, and check their true peak. Bass reaches the ceiling first in many tracks, and it is the part most affected by encoding.
- Keep a note of the numbers. Record integrated loudness and true peak for the version you uploaded, so you can compare it with later releases.
Common mistakes on SoundCloud
- Assuming the platform will normalize the track. If the level follows the file, a loud master will stay loud. Do not rely on a correction that the platform does not do.
- Uploading a limited master with no margin. A true peak of 0 dBTP may sound fine in the DAW and then overshoot after the transcode.
- Making a very quiet master to be safe. A quiet track sits low in the feed and sounds small beside others. Aim for a level that sounds finished, then check the true peak.
- Making a separate master for each service. One master near −14 LUFS with a true peak at or below −1 dBTP covers the common cases. Splitting the work adds risk without a clear gain.
Where to start
Measure the file with the free LUFS checker. It reads integrated loudness and true peak, which are the two numbers this article is about. If the file is close to −14 LUFS and the true peak is below −1 dBTP, it is ready to upload. If not, a free AI mastering pass can bring it to a streaming level, and you can measure the result before you upload.
To see how the major streaming services handle loudness, read the streaming loudness guide. For a check of true peak on any file, read how to check true peak online.
FAQ
What LUFS should I master for SoundCloud?
There is no published SoundCloud target. A master near −14 LUFS integrated, with a true peak at or below −1 dBTP, is a safe choice, and it works on streaming services too. Louder masters are possible, but they leave less margin for the transcode.
Does SoundCloud turn down loud tracks?
As far as public descriptions go, SoundCloud does not apply loudness normalization the way Spotify does, so the playback level depends mostly on the upload. Check the current behaviour before you rely on it, because platforms can change their settings.
Why does my track crackle on SoundCloud but not in my DAW?
Lossy encoding can add overshoot between samples. If the true peak in your DAW was close to 0 dBTP, the encoded copy may exceed the ceiling and distort. Lower the master so the true peak is at or below −1 dBTP, then compare the uploaded version with the file.
Measure your SoundCloud master before you upload
The LUFS checker is free and needs no account. Measure the file you plan to upload and check its true peak.
Master a track free